D-Link DXS-3610 User Manual - Page 370

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Please button, the following page will appear. Figure 6-171 BGP Dampening Settings (Please) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. BGP Dampening Dampened Paths Table This window is used to view and clear the BGP dampening dampened paths table. To view the following window, click L3 Features > BGP > BGP Dampening Dampened Paths Table, as shown below: Figure 6-172 BGP Dampening Dampened Paths Table Window The fields that can be configured are described below: Parameter Address Family Type Description Select the address family that will be used here. Options to choose from are:  IPv4 Unicast - Specifies to use the IPv4 unicast address family in this configuration.  IPv4 VRF - Specifies to use a VRF instance in this configuration. Enter the name of the VRF instance in the space provided or click the Please button to select a pre-configured VRF instance that will be used here. This name can be up to 12 characters long.  IPv4 Multicast - Specifies to use the IPv4 multicast address family in this configuration.  IPv6 Unicast - Specifies to use the IPv6 unicast address family in this configuration. Select the type clear here. Options to choose from are:  All - Specifies to display and clear all BGP dampening dampened paths.  IP Address - Specifies to display and clear BGP dampening dampened paths based on the IPv4 address entered. Enter the IPv4 address in the space provided.  Network Address - Specifies to display and clear BGP dampening dampened paths based on the IPv4 network address range entered. Enter 359