D-Link DXS-3610 User Manual - Page 24

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Jumbo Frame This window is used to display and configure the jumbo frame size and settings. The Switch supports jumbo frames. Jumbo frames are Ethernet frames with more than 1518 bytes of payload. The Switch supports jumbo frames with a maximum frame size of up to 9216 bytes. To view the following window, click System > Port Configuration > Jumbo Frame, as shown below: Figure 3-9 Jumbo Frame Window The fields that can be configured for Jumbo Frame are described below: Parameter Unit From Port - To Port Maximum Receive Frame Size Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Enter the maximum receive frame size value here. The range is from 64 to 9216 bytes. By default, this value is 1536 bytes. Click the Apply button to accept the changes made. Interface Breakout This window is used to configure the 100 Gbps interface breakout settings. Only two ports, one in each of the two groups, can be configured to breakout. They are: Group 1 (port 49, 50, or 52) and Group 2 (port 51, 53, or 54). MLAG peer ports or ports used for stacking cannot be configured to breakout. To view the following window, click System > Port Configuration > Interface Breakout, as shown below: Figure 3-10 Interface Breakout Window 13