D-Link DXS-3610 User Manual - Page 202

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description Report Suppression Select this option to enable or disable the report suppression. Suppression Time Enter the interval of suppressing duplicate MLD reports or leaves. The range is from 1 to 300. Proxy Reporting Select this option to enable or disable the proxy-reporting function. Mrouter Port Learning Select to enable or disable the Mrouter port learning function here. Source Address Enter the source IP of proxy reporting. This is available when Enabled is selected in Proxy Reporting. Querier State Select this option to enable or disable the querier state. Query Version Select the general query packet version sent by the MLD snooping querier. Options to choose from are 1 and 2. Query Interval Enter the interval at which the MLD snooping querier sends MLD general query messages periodically. The range is from 1 to 31744. Max Response Time Enter the maximum response time, in seconds, advertised in MLD snooping queries. The range is from 1 to 25. Robustness Value Enter the robustness variable used in MLD snooping. The range is from 1 to 7. Last Listener Query Interval Enter the interval at which the MLD snooping querier sends MLD group-specific or group-source-specific (channel) query messages. The range is from 1 to 25. Rate Limit Enter the rate limit value here. The range is from 1 to 1000. Select the No Limit option to apply no rate limit on this profile. Ignore Topology Change Select to enable or disable the Ignore Topology Change feature here. Click the Apply button to accept the changes made. MLD Snooping Groups Settings This window is used to display and configure the MLD snooping static group, and view MLD snooping group. To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Groups Settings, as shown below: Figure 5-86 MLD Snooping Groups Settings Window 191