D-Link DXS-3610 User Manual - Page 411

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Redistribute Type Metric Metric Type Route Map Level Description Select the redistribution type here. Options to choose from are:  Connected - Specifies to redistribute connected routes into ISIS.  Static - Specifies to redistribute static routes into ISIS.  RIP - Specifies to redistribute RIP routes into ISIS.  OSPF - Specifies to redistribute OSPF routes into ISIS  BGP - Specifies to redistribute BGP routes into ISIS. Enter the metric value of the redistributed routes here. The range is from 1 to 63. Select the metric type of the redistributed routes here. Options to choose from are:  None - The metric type is not specified.  Internal - The redistributed routes advertised with internal metrics.  External - The redistributed routes advertised with external metrics. Enter the name of the route map that will be used here. This name can be up to 16 characters long. Select the routing level that will be used here. Options to choose from are Level1, Level-1-2, and Level-2 Only. Click the Apply button to accept the changes made. Click the Delete button to remove a specific entry based on the information entered. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ISIS Redistribute ISIS Settings This window is used to display and configure the redistribute ISIS settings. This is used to redistribute ISIS routes from level 1 into level 2 and vice versa. To view the following window, click L3 Features > ISIS > ISIS Redistribute ISIS Settings, as shown below: Figure 6-220 ISIS Redistribute ISIS Settings Window The fields that can be configured are described below: Parameter Protocol Description Select the protocol that will be used here. Options to choose from are IPv4 and IPv6. 400