D-Link DXS-3610 User Manual - Page 186

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After MLAG was enabled and the Switch was rebooted, the following page will appear. Figure 5-69 MLAG Settings (Enabled) Window The fields that can be configured in MLAG State are described below: Parameter MLAG State Description Select to enable or disable the MLAG function here. Click the Apply button to accept the changes made. The fields that can be configured in MLAG Configuration are described below: Parameter Domain Device ID Hello Interval Description Enter the MLAG domain ID here. The range is from 1 to 255. Select the Default option to use the default value which is 1. Enter the MLAG device ID for the Switch here. The range is from 1 to 2. Select the Default option to use the default value which is 1. Enter the MLAG hello interval here. This is the time that elapses between MLAG hello message transmissions. The range is from 1 to 10 seconds. Select the Default option to use the default value which is 3 seconds. Click the Apply button to accept the changes made. The fields that can be configured in MLAG Peer Link Settings are described below: Parameter Port Peer Link Description Select the physical port number that will be used here. Select this option to configure the selected port as a peer-link port. Peer-links are used to create a connection between MLAG peer Switches. 175