D-Link DXS-3610 User Manual - Page 425

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide VRRPv3 Settings This window is used to display and configure the VRRP version 3 (VRRPv3) settings. To view the following window, click L3 Features > VRRPv3 Settings, as shown below: Figure 6-236 VRRPv3 Settings Window The fields that can be configured are described below: Parameter VLAN VRID Address Family Interface Name VRID Address Family Description Enter the ID of the VLAN interface that will be used here. The range is from 1 to 4094. Enter the ID of the virtual router that will be created here. The range is from 1 to 255. Select the address family used here. Options to choose from are:  IPv4 - Specifies to create an IPv4 virtual router.  IPv6 - Specifies to create an IPv6 virtual router. Enter the name of the VLAN interface that will be used in the display here. This string can be up to 12 characters long. Enter the ID of the virtual router that will be displayed here. The range is from 1 to 255. Select the address family that will be used in the display here. Options to choose from are:  All - Specifies to display all virtual routers.  IPv4 - Specifies to display IPv4 virtual routers only.  IPv6 - Specifies to display IPv6 virtual routers only. Click the Apply button to accept the changes made. Click the Find button to find and display an entry based on the information entered. Click the Edit button to configure detailed settings of the specified entry. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 414