D-Link DXS-3610 User Manual - Page 607

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Delete All button to delete all the entries. The fields that can be configured for Find FTN are described below: Parameter IP Address Mask Description Enter the FEC IPv4 address of the FTN here. Enter the FEC subnet mask of the FTN here. Click the Find button to locate a specific entry based on the information entered. Click the Show Detail button to display more information about the specified entry. After clicking the Show Detail button, the following page will appear. Figure 11-4 MPLS Forwarding Detail Window Click the Back button to return to the previous window. MPLS LDP Neighbor Password Settings This window is used to display and configure the MPLS LDP neighbor password settings. If the MD5 authentication is enabled, the LSR only establishes sessions with the peer when they exchange the same password. The password setting will be applied to negotiation with link neighbors or targeted neighbors. To view the following window, click MPLS > MPLS LDP Neighbor Password Settings, as shown below: Figure 11-5 MPLS LDP Neighbor Password Settings Window The fields that can be configured are described below: Parameter Neighbor IP Password Description Enter the neighbor IPv4 address here. This address will also be the neighbor's (peer) LSR ID. Enter the LDP peer password here. Select the Default option to use the default password (which is empty). Click the Apply button to accept the changes made. 596