D-Link DXS-3610 User Manual - Page 271

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Edit button, the following page will appear. Figure 6-50 OSPFv2 Process Settings (Edit) Window The fields that can be configured are described below: Parameter OSPF State Router ID Default Metric Type Distance State Originate Metric ECMP Description Select to enable or disable the OSPFv2 state. Enter the router ID in the IPv4 address format here. The router ID is a 32-bit number assigned to each router running the OSPF protocol. This number uniquely identifies the router within an AS. Each router has a unique router ID. Select the Default option to use the default router ID. Enter the default metric value used here. The range is from 1 to 16777214. Select the distance setting type here. Options to choose from are:  Inter-Area - Specifies the distance for OSPF inter-area routes.  Intra-Area - Specifies the distance for OSPF intra-area routes.  External-1 - Specifies the distance for OSPF external type-5 and type-7 routes with a type-1 metric.  External-2 - Specifies the distance for OSPF external type-5 and type-7 routes with a type-2 metric. Enter the administrative distance value here. The range is from 1 to 255. Select to enable or disable the Default Originate Information state here. This feature is used to generate a default external route (type-5 LSA) network 0.0.0.0 to the AS. Select the Originate option here. Options to choose from are Always and None. Selecting the Always option specifies to always generate the default route regardless of existence of a default route in the routing table. Enter the cost value associated with the generated default route here. If not specified, the default metric cost is 1. The range is from 1 to 65535. Enter the ECMP value for this process here. The range is from 1 to 64. Click the Apply button to accept the changes made. 260