D-Link DXS-3610 User Manual - Page 132

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Clear All button to clear all dynamic MAC addresses. Click the Show All button to display all the MAC addresses recorded in the MAC address table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Notification This window is used to display and configure MAC notification. To view the following window, click L2 Features > FDB > MAC Notification, as shown below: Figure 5-7 MAC Notification (MAC Notification Settings) Window The fields that can be configured are described below: Parameter Description MAC Address Notification Select to enable or disable MAC notification globally on the Switch Interval Enter the time value between notifications. The range is from 1 to 2147483647 seconds. By default, this value is 1 second. History Size Enter the maximum number of entries listed in the history log used for notification. The range is from 0 to 500. By default, this value is 1. MAC Notification Trap State Select to enable or disable the MAC notification trap state. Trap Type Select the trap type here. Options to choose from are:  Without VID - Specifies the trap information without the VLAN ID.  With VID - Specifies the trap information with the VLAN ID. Unit Select the stacking unit ID of the Switch that will be configured here. From Port - To Port Select the range of ports that will be used for this configuration here. Added Trap Select to enable or disable the added trap for the port(s) selected. Removed Trap Select to enable or disable the removed trap for the port(s) selected. Click the Apply button to accept the changes made for each individual section. 121