D-Link DXS-3610 User Manual - Page 416

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide IP Route Filter IP Prefix List This window is used to display and configure the IP route filter prefix list settings. To view the following window, click L3 Features > IP Route Filter > IP Prefix List, as shown below: Figure 6-228 IP Prefix List Window The fields that can be configured are described below: Parameter List Name Direction Sequence ID IP Network Address IPv6 Network Address GE LE Description Enter the IP prefix list name here. This name can be up to 32 characters long. Select the direction for this rule here. Options to choose from are:  Permit - Specifies that routes that match the rule entry are permitted.  Deny - Specifies that routes that match the rule entry are denied. Enter the sequence ID for this rule here. The range is from 1 to 65535. Enter the starting and ending IPv4 addresses in the range used here. Enter the IPv6 address and prefix length here. Enter the minimum prefix length of the route that can be matched here. The range is from 1 to 32 for IPv4 and 1 to 128 for IPv6. Enter the maximum prefix length of the route that can be matched here. The range is from 1 to 32 for IPv4 and 1 to 128 for IPv6. Click the Apply button to accept the changes made. Click the Clear button to clear the information associated with the IP prefix list entered. Click the Find button to locate a specific entry based on the information entered. Click the Clear IP All button to clear all the IP information associated with all IP prefix lists. Click the Clear IPv6 All button to clear all the IPv6 information associated with all IP prefix lists. Click the Edit button in the table to re-configure the specific entry. Click the Clear button in the table to clear the information associated with the specific entry. Click the Delete button to remove the specific entry. Click the Clear By Network button in the table to clear the information associated with the network. 405