D-Link DXS-3610 User Manual - Page 608

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MPLS LDP Neighbor Targeted Settings This window is used to display and configure the MPLS LDP neighbor targeted settings. LDP sends the targeted hello message at the configured interval to discover the neighbor. For a discovered neighbor, LDP maintains a hold-timer. The neighbor will time out if the timer has expired without the receipt of a hello message from the neighbor. To view the following window, click MPLS > MPLS LDP Neighbor Targeted Settings, as shown below: Figure 11-6 MPLS LDP Neighbor Targeted Settings Window The fields that can be configured are described below: Parameter Neighbor Targeted Targeted Hello Interval Targeted Hello Hold Time Description Enter the LSR ID of the targeted peer here. The targeted peer is used to establish the LDP session with the non-directly connected neighbor. Enter the interval to the hello message for sessions with extended peers here. The range is from 5 to 65535 seconds. Select the Default option to use the default value. Enter the hold-time of the hello messages for sessions with extended peers here. The range is from 15 to 65535 seconds. Select the Default option to use the default value. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 597