D-Link DXS-3610 User Manual - Page 644

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter VRF Name Description Enter the name of the VRF instance here. This can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Reset button to reset the specified entry's settings to the default settings. sFlow Sampler Settings This window is used to display and configure the sFlow sampler settings. To view the following window, click Monitoring > sFlow > sFlow Sampler Settings, as shown below: Figure 13-20 sFlow Sampler Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Instance Receiver Mode Sampling Rate Max Header Size Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the instance index number if multiple samplers are associated with one interface. The range is from 1 to 65535. Enter the receiver index for this sampler. If not specified, the value is 0. The range is from 1 to 4. Select the mode here. Options to choose from are:  Selecting Inbound specifies to sample ingress packets.  Selecting Outbound specifies to sample egress packets. By default, the Inbound option is used. Enter the packet-sampling rate here. The range is from 0 to 65536. Entering 0 will disable this function. By default, this value is 0. Enter the maximum number of bytes that should be copied from sampled packets. The range is from 18 to 256 bytes. By default, this value is 128 bytes. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 633