D-Link DXS-3610 User Manual - Page 359

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide IPv6 Static Multicast Route Settings This window is used to display and configure the IPv6 static multicast route settings. The PIM protocol does not have its own routing table but uses the unicast routing table to determine the reverse path forwarding interface to reach a network. This window is used to configure static multicast route to specify the RPF address for a network. To view the following window, click L3 Features > IP Multicast Routing Protocol > IPv6MC > IPv6 Static Multicast Route Settings, as shown below: Figure 6-157 IPv6 Static Multicast Route Settings Window The fields that can be configured are described below: Parameter IPv6 Address/Prefix Length Interface VLAN RPF Neighbor Address Description Enter the IPv6 network address and prefix length of the multicast source here. A decimal value that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address). A slash mark must precede the decimal value. Enter the VLAN ID that will be used here. The range is from 1 to 4094. Enter the IPv6 address of the next hop that can be used to reach the specified network here. Select the NULL option to specify that the RPF check result will always fail. Click the Apply button to accept the changes made. Click the Clear All button to clear the information displayed. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 348