D-Link DXS-3610 User Manual - Page 142

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit From Port - To Port GVRP Status Join Time Leave Time Leave All Time Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the enable or disable the GVRP port status. This enables the port to dynamically become a member of a VLAN. By default, this option is disabled. Enter the Join Time value in centiseconds. The range is from 10 to 10000 centiseconds. By default, this value is 20 centiseconds. Enter the Leave Time value in centiseconds. The range is from 10 to 10000 centiseconds. By default, this value is 60 centiseconds. Enter the Leave All Time value in centiseconds. The range is from 10 to 10000 centiseconds. By default, this value is 1000 centiseconds. Click the Apply button to accept the changes made. GVRP Advertise VLAN This window is used to display and configure the GVRP Advertise VLAN settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Advertise VLAN, as shown below: Figure 5-23 GVRP Advertise VLAN Window The fields that can be configured are described below: Parameter Unit From Port - To Port Action Advertise VID List Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the advertised VLAN to port mapping action here. Options to choose from are All, Add, Remove, and Replace. When selecting All, all the advertised VLANs will be used. Enter the advertised VLAN ID list here. Click the Apply button to accept the changes made. 131