D-Link DXS-3610 User Manual - Page 365

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Address Family Network Address Route Map Name Description Select the address family to use here. Options to choose from are:  IPv4 Unicast - Specifies to use IPv4 unicast address family here.  IPv4 VRF - Specifies to use the VRF instance here. Enter the name of the VRF instance in the space provided or click the Please button to select a pre-configured VRF instance that will be used here. This name can be up to 12 characters long.  IPv4 Multicast - Specifies to use IPv4 multicast address family here.  IPv6 Unicast - Specifies to use IPv6 unicast address family here. Enter the IPv4/IPv6 network address and mask that BGP will advertise here. Enter the route map name here. The configured network must be permitted by the specified route map to be advertised. This name can be up to 16 characters long. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Please button, the following page will appear. Figure 6-165 BGP Network Settings (Please) Window Select the VRF entry and click the OK button to use the selected VRF entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 354