D-Link DXS-3610 User Manual - Page 64

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Telnet/Web This window is used to display and configure Telnet and Web settings on the Switch. To view the following window, click Management > Telnet/Web, as shown below: Figure 4-25 Telnet/Web Window The fields that can be configured in Telnet Settings are described below: Parameter Telnet State Port Description Select to enable or disable the Telnet server feature here. Enter the TCP port number used for Telnet management of the Switch. The wellknown TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. The fields that can be configured in Source Interface are described below: Parameter Source Interface State Type Interface ID Description Select to enable or disable the source interface's state here. Select the type of source interface that will be used here. Options to choose from are Loopback, Mgmt, and VLAN. Enter the interface ID here. For loopback interfaces, the range is from 1 to 8. For the management (Mgmt) interface, this value can only be 0. For VLAN interfaces, the range is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in Web Settings are described below: Parameter Web State Port Description Select this option to enable or disable the configuration through the web. Enter the TCP port number used for Web management of the Switch. The wellknown TCP port for the Web protocol is 80. Click the Apply button to accept the changes made. 53