D-Link DXS-3610 User Manual - Page 59

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide SNMP Context Mapping Table Settings This window is used to display and configure the SNMP context mapping table settings. To view the following window, click Management > SNMP > SNMP Context Mapping Table Settings, as shown below: Figure 4-16 SNMP Context Mapping Table Settings Window The fields that can be configured are described below: Parameter Context Name Instance ID Instance Name VRF Name Description Enter the SNMP View-based Access Control Model (VACM) context name here. This name can be up to 32 characters long. The name must start with a letter and end with a letter or digit. Interior characters can be letters, digits, and hyphens. Enter the ID of the instance here. The range is from 1 to 65535. Enter the name of the instance here. This can be up to 12 characters long. Enter the name of the VRF instance here. This can be up to 12 characters long. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. RMON RMON Global Settings This window is used to enable or disable remote monitoring (RMON) for the rising and falling alarm trap feature for the SNMP function on the Switch. To view the following window, click Management > RMON > RMON Global Settings, as shown below: Figure 4-17 RMON Global Settings Window 48