D-Link DXS-3610 User Manual - Page 341

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured in Register Suppression Time are described below: Parameter Register Suppression Description Enter the register suppression timeout value here. The range is from 3 to 65535 seconds. When a DR receives the register-stop message, it will start the suppression timer. During the suppression time, a DR will stop sending Registerencapsulated data to the RP. This timer should be configured on the designated router. The value of the Register Probe Time must be less than half the value of the Register Suppression Time to prevent a possible negative value in the setting of the Register-Stop Timer. The minimal value for Register Suppression Time is 3. By default, this value is 60 seconds. Select the Default option to use the default value. Click the Apply button to accept the changes made. PIM for IPv6 SPT Threshold Settings This window is used to display and configure the Shortest Path Tree (SPT) threshold settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for IPv6 SPT Threshold Settings, as shown below: Figure 6-134 SPT Threshold Settings Window The fields that can be configured are described below: Parameter SPT Threshold Description Select the SPT threshold value here. Options to choose from are:  Infinity - Specifies to always rely on the shared tree.  0 - Specifies to establish the source tree right at the arrival of the first packet. By default, the Infinity option is used. Select the Default option to use the default setting. Click the Apply button to accept the changes made. PIM for IPv6 SSM Settings This window is used to display and configure the IPv6 PIM SSM settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6 > PIM for IPv6 SSM Settings, as shown below: Figure 6-135 PIM for IPv6 SSM Settings Window 330