D-Link DXS-3610 User Manual - Page 40

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Pdelay Request Interval Synchronization Interval Description minimum value being the sync-interval, and the maximum value being 32 times the sync-interval value. If the sync-interval is half a second and the delay request interval is 0, then the permitted time interval between successive delay request messages will be automatically adjusted to one second. The range is from 0 to 5. Enter the peer delay request interval value here. This specifies the permitted mean-time interval between successive peer delay request messages. In line with the IEEE 1588 protocol, this value must be represented as the logarithm to the base of 2 of this time, measured in seconds. The range is from 1 to 32 seconds. Enter the synchronization interval value here. This specifies the mean-time interval between successive synchronization messages. In line with the IEEE 1588 protocol, this value must be represented as the logarithm to the base of 2 of this time, measured in seconds. The range is from 1 to 2 seconds. Select the Half Second option to set 0.5 seconds as this value. Click the Apply button to accept the changes made. PTP P2P Transparent Port Settings This window is used to display and configure the peer delay request message interval on the P2P transparent clock port(s) specified. To view the following window, click System > PTP (Precise Time Protocol) > PTP P2P Transparent Port Settings, as shown below: Figure 3-25 PTP P2P Transparent Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port P2P Transparent Pdelay Request Interval Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Enter the P2P transparent peer delay request interval value here. The range is from 1 to 32. Click the Apply button to accept the changes made. 29