D-Link DXS-3610 User Manual - Page 249

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter IP Address Network Address RIP OSPF BGP ISIS Connected Hardware Summary VRF Name Description Select and enter the single IPv4 address here. Select and enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask. Select this option to display only RIP routes. Select this option to display only OSPF routes. Select this option to display only BGP routes. Select this option to display only ISIS routes. Select this option to display only connected routes. Select this option to display only hardware routes. Hardware routes are routes that have been written into the hardware chip. Select this option to display a summary and count of the route sources configured on this Switch. Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv6 Static/Default Route This window is used to display and configure the IPv6 static or default routes. To view the following window, click L3 Features > IPv6 Static/Default Route, as shown below: Figure 6-25 IPv6 Static/Default Route Window The fields that can be configured are described below: Parameter VRF Name Description Select and enter the name of the VRF instance here. This can be up to 12 characters long. Click the Select VRF button to display and select a VRF instance from the list. 238