D-Link DXS-3610 User Manual - Page 349

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter SA Filter Request Minimum TTL SA Cache Maximum Description Select the Configured option and enter the SA filter request string here. This string can be up to 32 characters long. The router will process all SA request messages from a specified peer. By not specifying this string, the router will stop processing Source-Active request messages from a specified peer. By specifying this string, the router only processes SA request messages that request groups that are defined in the standard IP access list from a specified peer. Enter the minimum TTL time value here. The range is from 0 to 255. When the SA messages are sent from MSDP peers, If the Time-To-Live (TTL) value of multicast data packets in SA message will be decreased, if the decreased TTL value is smaller than minimum TTL value of the MSDP peer the SA message was sent to, the SA will not be sent out. By default, this value is 0. Select the Default option to use the default value. Enter the maximum SA cache value here. The range is from 0 to 16383. When the maximum number of SA cache entries is configured to zero, the Switch cannot learn a SA cache entry from the peer. When the maximum number of SA cache entries is configured to be smaller than the existing SA cache entries, the older existing SA cache entries will be removed until the number of SA cache entries is equal to the maximum number. Select the None option to specify that no limitation is applied for the number of Source-Active cache entries. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. After clicking the Show Detail button, the following page will appear. Figure 6-145 MSDP Peer Settings (Show Detail) Window Click the Back button to return to the previous window. 338