D-Link DXS-3610 User Manual - Page 525

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured in Store DHCP Snooping Database are described below: Parameter URL Description Select the location from the drop-down list and enter the URL where the DHCP snooping database will be stored to here. Locations to choose from are TFTP, FTP, and Flash. An example URL is given. Click the Apply button to accept the changes made. The fields that can be configured in Load DHCP Snooping Database are described below: Parameter URL Description Select the location from the drop-down list and enter the URL where the DHCP snooping database will be loaded from here. Locations to choose from are TFTP, FTP, and Flash. An example URL is given. Click the Apply button to accept the changes made. Click the Clear button to clear all the counter information. DHCP Snooping Binding Entry This window is used to display and configure the DHCP snooping binding entries. To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping Binding Entry, as shown below: Figure 9-43 DHCP Snooping Binding Entry Window The fields that can be configured are described below: Parameter MAC Address VID IP Address Unit Port Expiry Description Enter the MAC address of the DHCP snooping binding entry here. Enter the VLAN ID of the DHCP snooping binding entry here. The range is from 1 to 4094. Enter the IP address of the DHCP snooping binding entry here. Select the Switch unit that will be used for this configuration here. Select the appropriate port used for the configuration here. Enter the expiry time value used here. The range is from 60 to 4294967295 seconds. 514