D-Link DXS-3610 User Manual - Page 261

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. The fields that can be configured in VRF Loopback Interface Settings are described below: Parameter Loopback Interface VRF Name Description Select the ID of the loopback interface here. The range is from 1 to 8. Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. The fields that can be configured in Find VRF Interface are described below: Parameter VRF Name Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. RIP RIP Settings This window is used to display and configure Routing Information Protocol (RIP) settings. To view the following window, click L3 Features > RIP > RIP Settings, as shown below: Figure 6-39 RIP Settings Window The fields that can be configured in RIP Global Settings are described below: Parameter RIP State Description Select to globally enable or disable the Routing Information Protocol (RIP) feature here. Click the Apply button to accept the changes made. 250