D-Link DXS-3610 User Manual - Page 493

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured in Port Security Trap Settings are described below: Parameter Trap State Description Select to enable or disable port security traps on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in Port Security Trap Rate Settings are described below: Parameter Trap Rate Description Enter the number of traps per second. The range is from 0 to 1000. By default, this value is 31. This indicates that an SNMP trap is generated for every security violation. Click the Apply button to accept the changes made. The fields that can be configured in Port Security System Settings are described below: Parameter System Maximum Address Description Enter the maximum number of secure MAC addresses allowed. The range is from 1 to 12288. By default, there is no limit. Select the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Port Security VLAN Settings are described below: Parameter VID List VLAN Max Learning Address Description Enter the VLAN ID(s) here. Enter the maximum number of allowed MAC addresses that can be learned on the specified VLAN(s) here. The range is from 1 to 12288. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. The fields that can be configured in Find VLAN are described below: Parameter VID Description Enter the VLAN ID that will be located here. Click the Find button to locate a specific entry based on the information entered. 482