D-Link DXS-3610 User Manual - Page 247

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IPv4 Static/Default Route, as shown below: Figure 6-22 IPv4 Static/Default Route Window The fields that can be configured are described below: Parameter VRF Name Default Route IP Address Mask IP Tunnel Gateway Null Interface Backup State Description Select and enter the name of the VRF instance here. This can be up to 12 characters long. Select this option to use the default route as the IPv4 address. When Default Route is not selected, enter the IPv4 address for this route here. When Default Route is not selected, enter the IPv4 network mask for this route here. Select the IP Tunnel option to use the IP tunnel feature and enter the tunnel ID in the space provided. The range of IDs is from 0 to 9999. Enter the gateway address for this route here. Select to enable or disable the NULL interface here. Select the backup state option here. Options to choose from are:  Primary - Specifies the route as the primary route to the destination.  Backup - Specifies the route as the backup route to the destination.  Weight - Specifies a weight number greater than zero, but less than the maximum paths number. This number is used to replicate identical route paths (multiple copies) in the routing table, so the paths get more chance of being hit for traffic routing. Enter the weight value in the space provided. The range is from 1 to 64. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 236