D-Link DXS-3610 User Manual - Page 127

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide NOTE: Link Aggregation cannot be configured across multiple Switch units in the stack when the NLB feature is enabled. To view the following window, click Management > NLB FDB Settings, as shown below: Figure 4-99 NLB FDB Settings Window The fields that can be configured are described below: Parameter NLB Type VID MAC Address Unit From Port - To Port Description Select the NLB type here. Options to choose from are Unicast and Multicast. After selecting Multicast as the NLB type, enter the VLAN ID used in this configuration here. Enter the unicast or multicast MAC address of the entry here. If a received packet contains a destination MAC address that matches the specified MAC address, it will be forwarded to the specified interface. Select the Switch unit ID that will be used here. Select the port range that will be used here. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 116