D-Link DXS-3610 User Manual - Page 251

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide IPv6 Route Table This window is used to display and configure the IPv6 route table. To view the following window, click L3 Features > IPv6 Route Table, as shown below: Figure 6-27 IPv6 Route Table Window The fields that can be configured are described below: Parameter IPv6 Address IPv6 Address/Prefix Length Interface Name Connected RIPng OSPFv3 ISIS BGP Database Hardware Summary VRF Name Description Select and enter the IPv6 address to display here. Select and enter the IPv6 address and prefix length to display here. Select the Longer Prefixes option to display IPv6 routes with prefixes greater than and equal to the prefix length. Select and enter the name of the interface to display here. Select this option to display only connected routes. Select this option to display only RIPng routes. Select this option to display only OSPFv3 routes. Select this option to display only ISIS routes. Select this option to display only BGP routes. Select this option to display all the related entries in the routing database instead of just the best route. Select this option to display only hardware routes. Hardware routes are routes that have been written into the hardware chip. Select this option to display a summary and count of the route sources configured on this Switch. Enter the name of the VRF instance here. This can be up to 12 characters long. Click the Select VRF button to display and select a VRF instance from the list. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 240