D-Link DXS-3610 User Manual - Page 558

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Periodic ReAuth Timer Inactivity State Inactivity Timer Restart Description Select to enable or disable periodic re-authentication for the selected port here. This parameter only affects the 802.1X protocol. Enter the re-authentication timer value here. The range is from 1 to 65535 seconds. By default, this value is 3600 seconds. Select to enable or disable the inactivity state here. When the Inactivity State is enabled, enter the inactivity timer value here. The range is from 120 to 65535 seconds. This parameter only affects the WAC authentication protocol. Enter the restart time value used here. The range is from 1 to 65535 seconds. Click the Apply button to accept the changes made. Network Access Authentication Sessions Information This window is used to view and clear the network access authentication session information. To view the following window, click Security > Network Access Authentication > Network Access Authentication Sessions Information, as shown below: Figure 9-78 Network Access Authentication Sessions Information Window The fields that can be configured are described below: Parameter Port MAC Address Protocol Description Select the appropriate Switch unit and port used for the query here. Enter the MAC address used here. Select the protocol option used here. Options to choose from are MAC, WAC, and DOT1X. Click the Clear by Port button to the clear the information based on the port selected. Click the Clear by MAC button to the clear the information based on the MAC address entered. Click the Clear by Protocol button to the clear the information based on the protocol selected. Click the Clear All button to clear all the information in this table. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to locate and display all the entries. 547