D-Link DXS-3610 User Manual - Page 678

DXS-3610 Series Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After clicking the Start button in IPv6 Trace Route section, the following IPv6 Trace Route Result will appear: Figure 16-34 IPv6 Trace Route Result Window Click the Back button to stop the trace route and return to the Trace Route section. Reset This window is used to reset the Switch's configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 16-35 Reset Window Select one of the following options:  Reset to factory default settings, save, and then reboot.  Reset to factory default settings, save, and then reboot. This option excludes the IP address.  Reset to factory default settings and do not reboot. This option excludes stacking information. Click the Apply button to initiate the reset. Reboot System This window is used to reboot the Switch and alternatively save the configuration before doing so. To view the following window, click Tools > Reboot System, as shown below: Figure 16-36 Reboot System Window When rebooting the Switch, any configuration changes that was made during this session, will be lost unless the Yes option is selected when asked to save the settings. Click the Reboot button to alternatively save the settings and reboot the Switch. 667