Netgear D7800 User Manual - Page 197
Set Up a Bridge for a Port Group or VLAN Tag Group
View all Netgear D7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800 6. From the menu above the Enable This Interface check box, select IPTV. The previous figure shows only the top of the Internet Setup page. 7. Configure a VLAN for the virtual IPTV interface: a. Make sure that the Enable This Interface check box is selected for the virtual IPTV interface. If you already enabled and configured the virtual IPTV interface, the check box is selected. b. Select the Use VLANID check box. c. Enter a VLAN ID that applies to the virtual IPTV interface. The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0. d. To specify a priority for the VLAN, in the Priority (0 ~ 7) field, enter a value from 0 to 7. e. Click the Apply button. Your settings are saved for the virtual IPTV interface. Note For information about enabling bridge mode for the IPTV virtual interface, see Enable Bridge Mode for IPTV Devices on page 192. Set Up a Bridge for a Port Group or VLAN Tag Group Some devices, such as an IPTV, cannot function behind the modem router's network address translation (NAT) service or firewall. Based on what your Internet service provider (ISP) requires, for the device to connect to the ISP's Manage the WAN and LAN Network Settings 197