Netgear D7800 User Manual - Page 53
Description, Field, LLC-BASED, Use VLANID, Bridge Mode, Internet IP Address, Get Dynamically from ISP
View all Netgear D7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800 Field Multiplexing Method VPI VCI Use VLANID Priority (0 ~ 7) Bridge Mode (IPTV interface only) Account Name Domain Name Internet IP Address Get Dynamically from ISP Description Select LLC-BASED or VC-BASED, as indicated by your ISP. The multiplexing method can either be virtual circuit (VC) based or logical link control (LLC) based. Enter a number between 0 and 255 for the virtual circuit number for the virtual path identifier (VPI), as indicated by your ISP. If your ISP did not provide you with a VPI setting, leave the default setting (8). The VPI might be required not only for a VC-based connection but also for an LLC-based connection. Enter a number between 32 and 65535 for the virtual circuit number for the virtual channel identifier (VCI), as indicated by your ISP. If your ISP did not provide you with a VCI setting, leave the default setting (35). The VCI might be required not only for a VC-based connection but also for an LLC-based connection. Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP. A VLAN ID might be required if you subscribe to both Internet service and a service such as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box cleared, which is the default setting. If your ISP provided you with a VLAN ID and a priority value, enter the priority value, which is a number from 0 to 7. You can enter a priority value only in combination with a VLAN ID. If your ISP did not provide you with a priority value, leave the default setting (0). If you are specifying the settings for the virtual IPTV interface and your ISP informed you that you must use bridge mode, select the Bridge Mode check box. For more information about bridge mode, see Enable Bridge Mode for IPTV Devices on page 192. Enter the account name, as indicated by your ISP. This name might also be called the host name. If your ISP did not provide you with an account name or host name, leave the default setting. Enter the domain name, as indicated by your ISP. If your ISP did not provide you with a domain name, leave this field blank. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. Manage the Internet Settings Manually 53