Netgear D7800 User Manual - Page 66

Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800 Field Multiplexing Method VPI VCI Use VLANID Priority (0 ~ 7) Internet Service Provider Login Password Service Name (If Required) Connection Mode Description These settings are disabled because they do not apply to a VDSL connection. Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP. A VLAN ID might be required if you subscribe to both Internet service and a service such as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check box cleared, which is the default setting. If your ISP provided you with a VLAN ID and a priority value, enter the priority value, which is a number from 0 to 7. You can enter a priority value only in combination with a VLAN ID. If your ISP did not provide you with a priority value, leave the default setting (0). By default, the menu selection is PPPoE for a PPP over Ethernet VDSL connection. The VDSL connection does not support PPP over ATM (PPPoA). Enter the login name that you use to log in to your Internet service, as indicated by your ISP. This login name is often an email address. Enter the password that you use to log in to your Internet service, as indicated by your ISP. Enter the service name that you use to log in to your Internet service, as indicated by your ISP. Often, a service name is not required. Select how the Internet connection functions: • Always On. Once the Internet connection is established, it remains active. This is the default setting. • Dial on Demand. When someone attempts to connect to the Internet, the Internet connection is established. When the idle time-out period expires, the Internet connection is terminated. • Manually Connect. You must connect to the Internet manually (see View, Establish, or Terminate the PPPoE or PPPoA Internet Connection on page 232). Manage the Internet Settings Manually 66