D-Link DGS-6600-48TS Configuration Guide - Page 213

Volume 4-Layer 3 Configurations / Chapter 22-Routing Information Protocol (RIP) Configuration Examples Displaying the RIP Routing Table Use the following command to display the summary address entries in the Routing Information Protocol (RIP) routing database: Command show ip rip database Explanation Displays the summary address entries in the Routing Information Protocol (RIP) routing database. In the following example, the user displays the summary address entries in the Routing Information Protocol (RIP) routing database for all VLAN interfaces: DGS-6600:2>show ip rip database Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP Network Rs 0.0.0.0/0 Rc 172.16.0.0/16 R 192.168.3.0/24 Next Hop 172.16.0.1 Metric From 1 1 2 172.16.0.1 If -- vlan5 vlan5 Time 0DT0H2M52S Total Entries: 3 DGS-6600:2> Configuration Examples RIP Configuration Example Configuring RIP protocol in R1 and R2. The routing entries can be learned by RIP protocol. In R1, routes 5.0.0.0/8 and 6.0.0.0/8 can be learned dynamically by RIP protocol. In R2, routes: 2.0.0.0/8 and 3.0.0.0/8 can be learned dynamically by RIP protocol. All PCs in the topology can communicate (e.g., PING) each other by routing. Topology Figure 22-1 RIP Configuration Example Topology DGS-6600 Configuration Guide 213