D-Link DGS-6600-48TS Configuration Guide - Page 241
OSPFv2 Configuration Example 2, Step 4
View all D-Link DGS-6600-48TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Volume 4-Layer 3 Configurations / Chapter 23-Open Shortest Path First (OSPF) Step 4: set OSPF DGS-6600:15(config-if)#router ospf DGS-6600:15(config-router)# network 4.0.0.0/8 area 0 DGS-6600:15(config-router)# network 5.0.0.0/8 area 0 DGS-6600:15(config-router)# network 6.0.0.0/8 area 0 Configuration Examples Verifying The Configuration Step 1: Use the following command to check the configuration. This command can be used to check both R1 and R2. DGS-6600:15#show ip route Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area # - A number of slots are inactive * - candidate default C 2.0.0.0/8 is directly connected, vlan2 C 3.0.0.0/8 is directly connected, vlan3 C 4.0.0.0/8 is directly connected, vlan4 O 5.0.0.0/8 [110/2] via 4.0.0.2, vlan4, 0DT0H3M56S O 6.0.0.0/8 [110/2] via 4.0.0.2, vlan4, 0DT0H3M56S Total Entries: 5 entries, 5 routes DGS-6600:15#show ip route Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area # - A number of slots are inactive * - candidate default O 2.0.0.0/8 [110/2] via 4.0.0.1, vlan4, 0DT0H2M21S O 3.0.0.0/8 [110/2] via 4.0.0.1, vlan4, 0DT0H2M21S C 4.0.0.0/8 is directly connected, vlan4 C 5.0.0.0/8 is directly connected, vlan5 C 6.0.0.0/8 is directly connected, vlan6 OSPFv2 Configuration Example 2 This OSPF configuration example contains three areas, virtual Link, NSSA, and external AS. DGS-6600 Configuration Guide 241