D-Link DGS-6600-48TS Configuration Guide - Page 307
Creating a Community List Entry, Setting Minimum Interval Between BGP Routing Updates, LEVEL
View all D-Link DGS-6600-48TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
Volume 4-Layer 3 Configurations / Chapter 30-Border Gateway Protocol (BGP) BGP Configuration commands Multiple commands can be applied to a list name. Command enable [privilege LEVEL] configure terminal ip as-path access-list ACCESS-LIST-NAME {permit | deny) REGEXP Explanation Enter privileged EXEC mode. Enter global configuration mode. Enter the following command to define a BGP Autonomous System (AS) path access list. Configuration Example To define an AS path access-list named mylist to deny access to the neighbor with AS number 65535: dgs-6600:2>enable dgs-6600:15#configure terminal dgs-6600:15(config)#ip as-path access-list mylist deny 65535 dgs-6600:15(config)# Creating a Community List Entry Use the ip community-list command to add a community list entry. Community Lists are used to specify BGP community attributes. The community attribute is used for implementing policy routing. It is an optional, transitive attribute and facilitates transfer of local policies through different autonomous systems. It includes community values that are 32 bits long. The ip community-list command can be applied multiple times. If the no ip community access-list command is used without specifying the permit or deny keywords, all communities bonded at the specified access lists will be removed. Command enable [privilege LEVEL] configure terminal ip community-list COMMUNITY-LIST-NAME {permit | deny) COMMUNITY Explanation Enter privileged EXEC mode. Enter global configuration mode. Enter the ip community-list command to define community lists. Configuration Example The following example shows you how to create a community-list named mycommlist, that permits routes from network 10 in autonomous system 50000: dgs-6600:2>enable dgs-6600:15#configure terminal dgs-6600:15(config)#ip community-list mycommlist permit 50000:10 dgs-6600:15(config)# Setting Minimum Interval Between BGP Routing Updates Use the neighbor advertisement interval command to set the minimum interval between the sending of Border Gateway Protocol (BGP) routing updates. DGS-6600 Configuration Guide 307