D-Link DGS-6600-48TS Configuration Guide - Page 432

Volume 8-Security & Authentication / Chapter 39-Authentication, Authorization and Accounting (AAA) ConfigurationList of Constants and Default Enabling Authorization from a Server The authorization function configures the Switch to only use settings that have been authorized by a RADIUS server. These settings include the VLAN assignment, user priority assignment, and bandwidth assignment. Enter the following command to enable the authorization function: Command aaa authorization Explanation Enables the authorization function. In the following example, the user enables the Switch to only use the AAA settings that have been authorized by the RADIUS server: DGS-6600:2>enable DGS-6600:15#configure terminal DGS-6600:15(config)#aaa authorization DGS-6600:15(config)#end List of Constants and Default Settings Constant Name Value Maximum Number of Method Lists 2 per Application Maximum Number of AAA Server 8 Groups Maximum Number of Server Hosts 64 in an AAA Server Group Table 39-1 Constants Values Variable Name Default Value AAA Authentication Method None AAA Authorization Disabled. Default Timeout for Server Reply 5 seconds Default number of times 2 authentication requests will be resent by the Switch when no response is received. Number of AAA Group Servers None Table 39-2 Default Variable Values DGS-6600 Configuration Guide 432