D-Link DGS-6600-48TS Configuration Guide - Page 562

Volume 11-System Management / Chapter 57-File System File System Configuration Commands Applying Configuration File to Running Configuration The Switch allows a configuration file from a remote server to be copied to the running configuration or local storage device. Command copy SOURCE-URL running-config Explanation Copies a configuration file from a remote server to be the running configuration or local storage device. Clearing the Running Configuration The clear running-config factory-defaults command is used to clear the system configuration retained in DRAM. Executing the clear running-config factory-defaults command (at privilege level 15) causes all the all configuration information to be cleared. NOTICE: Ensure that a backup of the configuration is made using the copy command or that a configuration profile is uploaded before using the clear running-config command. When the clear running-config command is executed, the Switch will reset the running configuration back to factory default setting. NOTE: Since the clear running-config command clears all system configuration settings including IP parameters. All the applications that are being used to manage the Switch will lose connection, due to the reset of the Switch IP address. Therefore, the user is recommended to implement a configuration file reload after executing the clear running-config command. Use the following command in global configuration mode to clear the system running configuration: Command clear running-config factory-defaults Explanation Clears the system running configuration. DGS-6600 Configuration Guide 562