D-Link DGS-6600-48TS Configuration Guide - Page 231

Volume 4-Layer 3 Configurations / Chapter 23-Open Shortest Path First (OSPF) OSPF Configuration Commands Displaying ABR and ASBR Information Use the following command to display the ABR and ASBR routing table entries for the OSPF instance: Command show ip ospf border-routers Explanation Displays the ABR and ASBR routing table entries for the OSPF instance. In the following example, the user displays the ABR and ASBR routing table entries for the OSPF instance: dgs-6600:2>show ip ospf border-routers OSPF process internal Routing Table Codes: i - Intra-area route, I - Inter-area route i 10.47.65.83 [1] via 10.47.65.83, through TransitArea 0.0.0.1, ABR, Area 0.0.0.0 i 10.47.65.83 [1] via 47.65.51.2, vlan51, ABR, TransitArea 0.0.0.1 i 10.47.65.81 [1] via 47.65.50.1, vlan50, ASBR, Area 0.0.0.0 dgs-6600:2> Displaying OSPF Neighbor Information Use the following command to display information about the OSPF neighbors: Command Explanation show ip ospf neighbor [interface INTERFACE- Displays information about the OSPF neighbors. ID | neighbor NEIGHBOR-ID] [detail] In the following example, the user displays information about all the OSPF neighbors: dgs-6600:2>show ip ospf neighbor Neighbor ID Pri State 10.47.65.81 1 Full/BDR 10.47.65.83 1 Full/DR 10.47.65.83 1 Full/ - dgs-6600:2> Dead Time 00:00:34 00:00:34 00:00:36 Address 47.65.50.1 47.65.51.2 47.65.51.2 Interface vlan50 vlan51 VLINK0 In the following example, the user displays the OSPF neighbor information for VLAN 50: dgs-6600:2>show ip ospf neighbor interface vlan50 Neighbor ID Pri State Dead Time Address 10.47.65.81 1 Full/BDR 00:00:39 47.65.50.1 dgs-6600:2> Interface vlan50 DGS-6600 Configuration Guide 231