D-Link DGS-6600-48TS Configuration Guide - Page 66

Volume 1-Configuration Fundamentals / Chapter 6-Accessing the Web Interface (Web UI) In the following example, the user configures to enable the Web interface. Configuration Commands DGS-6600:15#configure terminal DGS-6600:15(config)#ip http server DGS-6600:15(config)#end Configuring the Web Service Port The user can change the port used by the Web service by using the following command in global configuration mode: Command ip http service-port TCP-PORT Explanation Configures the port used by the web service. In the following example, the user configures the TCP port number for web to be 6600: DGS-6600:15#configure terminal DGS-6600:15(config)#ip http service-port 6600 DGS-6600:15(config)#end Specifying Web Management Terminals The user can specify the hosts that are allowed to manage the Switch using an HTTP web connection by using the following command in global configuration mode: Command ip trusted-host {IP-ADDRESS | NETWORKADDRESS/PREFIX-LENGTH} htttp Explanation Specifies a host that is allowed to manage the Switch using a web connection. In the following example, the user allows the host 10.73.87.3 to have access to the Switch using an HTTP web connection: DGS-6600:15#configure terminal DGS-6600:15(config)#ip trusted-host 10.73.87.3 http DGS-6600:15(config)#end Displaying Trusted Host Web Terminals The user can display a list of the hosts that are allowed to manage the Switch using an HTTP web connection by entering the following command in privileged EXEC mode: Command show ip trusted-host http Explanation Displays a list of the hosts that are allowed to manage the Switch using a web connection. DGS-6600 Configuration Guide 66