D-Link DGS-6600-48TS Configuration Guide - Page 43
Command Prompt, Using Command History, Recalling Commands
View all D-Link DGS-6600-48TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Volume 1-Configuration Fundamentals / Chapter 3-Command-Line Interface (CLI) User EXEC Mode Configuration Commands Using Command History The Switch CLI provides a history or record of commands that have been entered in the current console session. This feature is particularly useful for recalling long or complex commands or entries, including access lists. The Switch records 20 command lines in its history buffer. The command history feature is enabled by default. The commands in the history buffer can be displayed by using the show history command. The following example uses the show history command to display the commands in the history buffer: DGS-6600:15#show history 1 enable 2 configure terminal 3 default ip telnet service-port 4 end 5 show history DGS-6600:15# Recalling Commands To recall commands from the history buffer, use one of the following key combinations:I Command Explanation or the key. or the key. Recalls commands in the history buffer, beginning with the most recent command. Repeat the key sequence to recall successively older commands. Returns to more recent commands in the history buffer after recalling commands with the or the key. Repeat the key sequence to recall the most recent commands successively. Table 3-5 Recalling Commands Command Prompt The user can change the command prompt of the Switch so that it displays the product name, system name, or a user-defined string. The user can also specify if the command prompt displays the level of the user that is currently logged into the Switch. By default the CLI Prompt displays the product name and the user level. A command prompt is shown in the following format: WWWW:XX(YY)Z Letter WWWW XX Description Represents the model name of the Switch, e.g. DGS-6600, the system name of the Switch, or the user-defined string. This part of the command prompt is always followed by a colon. Represents the user access level, e.g. 1 indicates a Basic User, 2 indicates an Advanced User, 12 indicates a Power User, and 15 indicates an Administrator. Table 3-6 Command Prompts DGS-6600 Configuration Guide 43