D-Link DGS-6600-48TS Configuration Guide - Page 57

Volume 1-Configuration Fundamentals / Chapter 4-Accessing the Command Line Interface Terminal Settings The user can use one of the following commands to change the default number of lines displayed on the terminal screen for the current session or apply the changes to all future sessions: Command terminal length LINES terminal length LINES default Explanation Configures the number of lines that will be displayed on the terminal screen for the current session. OR Configures the number of lines that will be displayed on the terminal screen for all current and future sessions. The following example configures the current session to display 60 lines on the terminal screen: terminal length 60 The following example configures the current and all future sessions to display 60 lines on the terminal screen: terminal length 60 default NOTE: The settings specified in these commands also apply to both Telnet and SSH sessions automatically. Configuring the Max Number of Characters Displayed per Terminal Line The user can specify the maximum number of characters that will displayed on each line in the console window. The user can specify a value between 80 and 255 characters. Use the following command to specify the number of characters that will be displayed on a terminal line: Command terminal width [default] Explanation Configures the maximum number of characters that can be displayed in the terminal window. The range is from 80 to 255 characters and the argument default specifies to save the setting permanently in the startup configuration file. In the following example, the user specifies that a maximum of 100 character can be displayed in a terminal window and by using the default keyword saves the setting into the system configuration file for the next switch startup.: DGS-6600:2>terminal width 100 default DGS-6600 Configuration Guide 57