D-Link DGS-6600-48TS Configuration Guide - Page 556

Volume 11-System Management / Chapter 57-File System File System Configuration Commands The following commands are used to manage the file system: File System Configuration Commands Command dir [FILE-SYSTEM:] [PATH-NAME | [FILENAME]] delete [FILE-SYSTEM:] [PATH-NAME | FILENAME] copy SOURCE-URL DESTINATION-URL Explanation Displays information for a file or a list of files in the specified path name. Used to delete a file on the Switch. Used to copy files on the Switch. NOTE: The specified URL must be represented by an absolute path. The specified URL cannot be represented by a relative path. The following example displays the list of files in the root directory of the file system on the system's flash: DGS-6600:2>dir flash:\ log images configurations DGS-6600:2> The following example copies the file called "dgs-6604_log.txt", stored in the on-board flash memory, to a file called "dgs-6604_log.txt" on the card inserted in compact flash slot 1 (CF1): DGS-6600:15#copy flash:\log\system_log.txt cf1:\system_log.txt Copy from flash:\log\system_log.txt to cf1:\system_log.txt .....done DGS-6600:15# The following example deletes the file name "test" from the flash card inserted in CF1: DGS-6600:15#delete cf1:\test Delete cf1:\test(y/n) [n]?y DGS-6600:15# Managing Configuration Files The device initializes with the default configuration. When the user changes the configuration, the updated configuration will automatically be stored in DRAM. This copy of the configuration is called the running configuration. DGS-6600 Configuration Guide 556