D-Link DGS-6600-48TS Configuration Guide - Page 328

Volume 4-Layer 3 Configurations / Chapter 30-Border Gateway Protocol (BGP) Configuration Examples Verifying The Configuration R2 is used as the example to check the correctness of tables. Use the same commands to check the other routers tables DGS-6600:15#show ip bgp neighbors 10.4.4.2 BGP neighbor is 10.4.4.2, remote AS 65101, local AS 65101, internal link BGP version 4, remote router ID 10.4.4.2 BGP state = Established, up for 0DT0H18M33S Last read 0DT0H18M33S, hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: Route refresh: advertised and received (old and new) 4-Byte AS number: advertised AS TRANS: Address family IPv4 Unicast: advertised and received Received 0 in queue Sent 0 in queue Sent Received Opens: 1 1 Notifications: 0 0 Updates: 3 1 Keepalives: 21 19 Route Refresh: 0 0 Dynamic Capability: 0 0 Total: 25 21 Connect retry time is 120 seconds In update elapsed time is 1112 seconds Minimum time between advertisement runs is 5 seconds Minimum time between as origination runs is 15 seconds For address family: IPv4 Unicast BGP table version 20, neighbor version 20 Index 0, Offset 0, Mask 0x1 AF-dependant capabilities: Graceful restart: advertised 2 accepted prefixes 6 announced prefixes Connections established 1; dropped 0 Local host: 10.4.4.1, Local port: 49860 Foreign host: 10.4.4.2, Foreign port: 179 Nexthop: 10.4.4.1 For address family: IPv4 Unicast BGP table version 24, neighbor version 24 Index 1, Offset 0, Mask 0x2 AF-dependant capabilities: Graceful restart: advertised 1 accepted prefixes 6 announced prefixes Connections established 1; dropped 0 Local host: 192.168.1.2, Local port: 179 Foreign host: 192.168.1.1, Foreign port: 1024 Nexthop: 192.168.1.2 DGS-6600 Configuration Guide 328