D-Link DGS-6600-48TS Configuration Guide - Page 229

Volume 4-Layer 3 Configurations / Chapter 23-Open Shortest Path First (OSPF) OSPF Configuration Commands Displaying OSPF Protocol and Interface Settings Use the following command to display general information about the OSPF routing process: Command show ip ospf show ip protocols ospf show ip ospf interface [INTERFACE-ID] Explanation Displays the OSPF operating status. Displays the configured OSPF global settings, which are related to the overall IP routing function. Displays interface settings and operational status. In the following example, the users displays the OSPF operating status: dgs-6600:2>show ip ospf Operational Router ID 10.47.65.82 Process uptime is 2 hours 58 minutes Conforms to RFC2328, and RFC1583Compatibility flag is disabled This router is an ABR, ABR Type is Standard (RFC2328) SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Number of external LSA 1 Number of router LSA 5 Number of network LSA 2 Number of non-default summary LSA 5 Number of asbr summary LSA 1 Number of non-default external LSA 1 Number of LSA originated 6 Number of LSA received 52 Number of current LSA 14 LSDB database overflow limit is 24576 Number of areas attached to this router: 2 Area 0.0.0.0 (BACKBONE) Number of interfaces in this area is 2 active interface number is 2 Number of fully adjacent neighbors in this area is 2 SPF algorithm last executed 02:56:28.263 ago SPF algorithm executed 6 times Number of LSA 7 Network 47.65.50.0/24 Area 0.0.0.1 Number of interfaces in this area is 1 active interface number is 1 Number of fully adjacent neighbors in this area is 1 Number of fully adjacent virtual neighbors through this area is 1 SPF algorithm last executed 02:56:38.259 ago SPF algorithm executed 4 times Number of LSA 6 Network 47.65.51.0/24 dgs-6600:2> DGS-6600 Configuration Guide 229