D-Link DGS-6600-48TS Configuration Guide - Page 547

Volume 10-Network Management / Chapter 55-Error Disable Port Recovery Chapter Overview Chapter 55 Error Disable Port Recovery Chapter Overview The following topics are included in this chapter, please go to the topic for more detailed information: • Chapter Overview • An introduction to Error Disable Port Recovery • Error Disable Port Recovery Configuration Commands • Configuring Error Disable Port Auto Recovery • Displaying Error Disable Status • List of Constants and Default Settings An introduction to Error Disable Port Recovery A physical port may be put in the error disabled state if a violation takes place. When a port is in the error disabled state, the port cannot transmit or receive any traffic. When a physical port is in the error disabled state, the port can be recovered manually by applying the shutdown and the no shutdown command. The mechanism described in this chapter is used to automatically recover an error disabled port. Error Disable Port Recovery Configuration Commands Configuring Error Disable Port Auto Recovery The user can configure a port to automatically recover from an error disabled state. If a port is error disabled due to a violation, the port cannot transmit or receive any traffic. With automatic recovery, the port will be recovered after the specified timer has expired. Automatic recovery can be individually controlled for different reasons. The following commands are used to configure the auto recovery settings for an error disabled ports Command errdisable recovery cause {all | loopback-detection} [interval SECONDS] show errdisable recovery Explanation Configures the auto recovery settings of an error disabled port. Displays the auto recovery settings that will be used on error disabled ports. DGS-8000 Configuration Guide 547