HP MSA 1040 HP MSA 1040 SMU Reference Guide (762784-001, March 2014) - Page 112
EMP A Revision. Firmware revision of the Enclosure Management Processor in controller module A's Expander
View all HP MSA 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
• Manufacturing Location. • Revision. • EMP A Revision. Firmware revision of the Enclosure Management Processor in controller module A's Expander Controller. • EMP B Revision. Firmware revision of the Enclosure Management Processor in controller module B's Expander Controller. • EMP A Bus ID. • EMP B Bus ID. • EMP A Target ID. • EMP B Target ID. • Midplane Type. • Enclosure Power (watts). • PCIe 2-Capable. Shows whether the enclosure is capable of using PCI Express version 2. Disk properties When you select a disk and click the Properties tab, a table shows: • Health. OK Degraded Fault N/A (if the disk is spun down) Unknown • Health Reason. If Health is not OK, this field shows the reason for the health state. • Health Recommendation. If Health is not OK, this field shows recommended actions to take to resolve the health issue. • Status. • Up: The disk is present and is properly communicating with the expander. • Spun Down: The disk is present and has been spun down by the DSD feature. • Warning: The disk is present but the system is having communication problems with the disk LED processor. For disk and midplane types where this processor also controls power to the disk, power-on failure will result in Error status. • Error: The disk is present but is not detected by the expander. • Unknown: Initial status when the disk is first detected or powered on. • Not Present: The disk slot indicates that no disk is present. • Enclosure ID. • Slot. • How Used. • AVAIL: Available. • FAILED: The disk is unusable and must be replaced. Reasons for this status include: excessive media errors; SMART error; disk hardware failure; unsupported disk. • GLOBAL SP: Global spare. • LEFTOVR: Leftover. • VDISK: Used in a vdisk. • VDISK SP: Spare assigned to a vdisk. • Type. • SAS: Enterprise SAS. • SAS MDL: Midline SAS. • Vendor. 112 Viewing system status