Yamaha 01V96 Owner's Manual - Page 104
Setting the Stereo Out and Bus Out 1–8 from the Control Surface, Setting the Levels
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
104 Chapter 8-Bus Outs Setting the Stereo Out and Bus Out 1-8 from the Control Surface You can use the faders, [SEL] buttons, and various buttons and controls in the SELECTED CHANNEL section on the top panel to directly control certain parameters for the Stereo Out and Bus Out 1-8. Setting the Levels Move the [STEREO] fader to adjust the Stereo Out levels. Press the [ON] button in the STEREO section to turn the Stereo Out on or off. To set Bus Out 1-8 levels, press the [MASTER] button in the LAYER section to select the Master layer, then move faders 9-16. At this time, you can turn Bus Out 1-8 on or off using the [ON] 9-16 buttons. EQ'ing and Balancing the Stereo Out and Bus Outs 1 Press the [SEL] button of the bus to which you want to apply EQ or set the level balance. 2 To adjust the EQ of the currently-selected bus, select the desired band by pressing one of the following buttons in the SELECTED CHANNEL section: • [HIGH] button HIGH band • [H-MID] button .......... HIGH-MID band • [L-MID] button LOW-MID band • [LOW] button LOW band 3 Use the [Q], [FREQUENCY], and [GAIN] controls to adjust the Q, frequency, and gain of the band selected in Step 2. See page 84 for more information on EQ. 4 To adjust the Stereo Out Balance parameter, use the [PAN] control in the SELECTED CHANNEL section. Note: If you select Aux Out 1-8 or Bus Out 1-8, the [PAN] control is disabled. 01V96-Owner's Manual