Yamaha 01V96 Owner's Manual - Page 270
DELAY+REV, DELAY->REV, Parameter, Range, Description, DELAY L, FB. DLY, FB. GAIN, DLY.BAL, REV TIME
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
270 Appendix A: Parameter Lists DELAY+REV One input, two output delay and reverb effects in parallel. Parameter Range Description DELAY L DELAY R FB. DLY FB. GAIN DELAY HI HPF LPF DLY.BAL REV TIME INI. DLY REV HI DIFF. DENSITY SYNC NOTE L NOTE R NOTE FB 0.0-1000.0 ms Left channel delay time 0.0-1000.0 ms Right channel delay time 0.0-1000.0 ms Feedback delay time -99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) 0.1-1.0 Delay high-frequency feedback ratio THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency 0-100% Delay and reverb balance (0% = all delay, 100% = all reverb) 0.3-99.0 s Reverb time 0.0-500.0 ms Initial delay before reverb begins 0.1-1.0 High-frequency reverb time ratio 0-10 Spread 0-100% Reverb density OFF, ON Tempo parameter sync on/off 1 Used in conjunction with TEMPO to determine left channel DELAY L 1 Used in conjunction with TEMPO to determine right channel DELAY R 1 Used in conjunction with TEMPO to determine FB. DLY 1. setting) (Maximum value depends on the tempo DELAY->REV One input, two output delay and reverb effects in series. Parameter DELAY L DELAY R FB. DLY FB. GAIN DELAY HI HPF LPF DLY.BAL REV TIME INI. DLY REV HI DIFF. DENSITY SYNC NOTE L NOTE R NOTE FB Range Description 0.0-1000.0 ms Left channel delay time 0.0-1000.0 ms Right channel delay time 0.0-1000.0 ms Feedback delay time -99 to +99% Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) 0.1-1.0 Delay high-frequency feedback ratio THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency 0-100% Delay and delayed reverb balance (0% = all delayed reverb, 100% = all delay) 0.3-99.0 s Reverb time 0.0-500.0 ms Initial delay before reverb begins 0.1-1.0 High-frequency reverb time ratio 0-10 Spread 0-100% Reverb density OFF, ON Tempo parameter sync on/off 1 Used in conjunction with TEMPO to determine left channel DELAY L *1 Used in conjunction with TEMPO to determine right channel DELAY R *1 Used in conjunction with TEMPO to determine FB. DLY 1. setting) (Maximum value depends on the tempo 01V96-Owner's Manual