Yamaha 01V96 Owner's Manual - Page 72

72 Chapter 6-Analog I/O & Digital I/O Card Format In Out Resolution/Sampling Rate Connectors MY4-DA 4 20-bit, 44.1/48 kHz XLR-3-32 type (balanced) x4 Analog out - MY8-DA96 8 24-bit, 44.1/48/88.2/96 kHz MY8-AE2 MY8-AE96 AES/EBU I/O MY8-AE96S3 8 24-bit, 44.1/48 kHz 25-pin D-sub 8 24-bit, 44.1/48/88.2/96 kHz MY8-AT2 MY16-AT ADAT I/O MY8-TD2 Tascam MY8-mLAN2 IEEE1394 16 16 24-bit, 44.1/48 kHz 88 Optical x2 Optical x4 25-pin D-sub BNC wordclock output 6-pin 1394 connector x2 1. This card is a substitution for a 20-bit MY8-AD card. 2. These cards support 24-bit/96 kHz in Double Channel mode. They require 96kHz wordclock sig- nals. 3. This card is identical to the MY8-AE96, except that it features a sampling rate converter. See the Yamaha Professional Audio Web site at the following URL for up-to-date news on I/O cards: . Converting Sampling Rates of Signals Received at I/O Card Inputs An optional MY8-AE96S Digital I/O card features sampling rate converters, so you can easily convert the sampling frequency of digital inputs to the current 01V96 sampling rate. 1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the DIO/Setup | Format page appears. Use the buttons in the SRC sections to turn the sampling rate converters on and off. You can turn the sampling rate converters of the digital I/O card on or off in pairs (odd & even channels, in this order). Tip: The FS box on the Word Clock page displays the sampling frequency at which the 01V96 is currently operating. Note: The sampling rate converter is available only on the Yamaha MY8-AE96S Digital I/O card. If you have installed another type of I/O card in the slot, or if no card is installed in the 01V96, the buttons in the SRC sections are disabled. 01V96-Owner's Manual