Yamaha 01V96 Owner's Manual - Page 55
play the Meter | CH1-32 Make sure that [ON] button indicators 1-8 are steadily lit
View all Yamaha 01V96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Initial Track Recording 55 Tutorial 5 4 Make sure that the S buttons for Input Channels 17-24 are turned on and the 1-8 buttons are turned off, then use the PAN control to pan the monitoring signal. Tip: Controlling Input Channel 17-32 Pan settings, faders, and the [ON] buttons will affect the monitoring signal, but will not affect the signal recorded to the digital MTR. 5 Press the DISPLAY ACCESS [HOME] button, then press the [F1] button to display the Meter | CH1-32 page. 6 Make sure that [ON] button indicators 1-8 are steadily lit, then raise the [STEREO] fader to 0 dB. 7 While the musicians play the musical instruments, adjust faders 1-8, [MONITOR OUT] control, and [PHONES] control to set the appropriate monitoring level. Now you can monitor via the monitoring system and headphones the signals sent from Input Channels 17-24 to the Stereo Bus. Note: If the L & R level meters reach the "OVER" position, lower the [STEREO] fader. 01V96-Owner's Manual